Diff of bc10/AC adapter - labs.beatcraft.com

The added line is THIS COLOR.
The deleted line is THIS COLOR.
Go to bc10/AC adapter.
Deleting diff of bc10/AC adapter
[[bc10]]

COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. }
-Contents
#Contents

* Summary [#pb51baa7]] [#e5d0a4d4]
COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. }
>
This section shows how to replace a plug of an AC adapter. bc10 requires the EIAJ standard type-1 DC plug (center plus)~
for its AC adapter. If  the plug of an AC adapter does not come with this type, its plug is needed to be changed. This~
explains how to replace the plug.

* AC Adapter [#od013a9b]
** Specifications [#tfb9cbb7]
COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. }
>
-The specifications of the AC adapter for bc10 are:
-- Plug: EIAJ Type-1 (EIAJ-1) center plus 
-- Rated Voltage: DC 5V
-- Rated Current: more than 2A
-The specifications of the EIAJ standard type-1 DC plug
-- Outer Diameter 2.35 mm
-- Inner Diameter 0.7 mm
-- Shaft Length 9.2 mm

>
The specifications of the AC adapter are described above. If an existing AC adapter does not have EIAJ-1 center plus, its~
plug is easily replaced. The next section shows how to alter the plug.

** How to replace AC Adapter [#x75b2aad]
*** List of Parts [#pc72a56a]

COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. }
>
|Name     |Quantity|Specs                     |URL|Others|
|AC Adapter|CENTER:   1| Switching AC to DC power supply |http://akizukidenshi.com/catalog/g/gM-01801/||
|EIAJ1 Plug|CENTER:  1|EIAJ DC plug Type 1 (Straight)|||
|Heat shrinking tube|CENTER: 1|3mm diameter               ||Cut it for adequate length|


*** Instructions [#fdcc1709]

COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. }
>
-AC Adapter
--&ref(DSCF3214.JPG,,25%);
-AC Adapter and EIAJ1 Plug
--&ref(DSCF3215.JPG,,25%);~
Remove the original plug from the AC adapter, and replace it with EIAJ1 type, which is adequate for the DC input jack of~
bc10. Twist the strands at the edges of AC adapter's cables, and put the wire through the heat shrinking tube before the~
EIAJ1 plug solders the adapter. To use multimeter, identify the plus side and the minus side, and distinguish one from the~
other. Then, the EIAJ1 plug is solders the cables of the AC adapter.
-After solder the EIAJ1 plug to the adapter
--&ref(DSCF3217.JPG,,25%);~
To prevent short circuit, put heat shrinking tube over the lower wire's soldered area. This picture is taken before heat~
shrinking tube is put on. The heat shrinking tube covers completely over the soldered area.Then, shrink the tube. 
-Put on the cup
--&ref(DSCF3218.JPG,,25%);~
Put on the cup, and this is the finished product. The assembly process is completed.~

COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. }