- 追加された行はこの色です。
- 削除された行はこの色です。
[[labs.beatcraft.com]] ~
#contents
* CUDA5/CentOS6.4 [#uc1c5ea8]
CentOS 6.4(64bit) へCUDA5のインストール手順について記載します。 ~
* Hardware Spec [#de8b31c5]
主なHardware Specは以下のとおりです。~
#ref(CUDA_Tesla.jpg,,80%) ~
~
#ref(CUDA_PC.jpg,,80%) ~
~
- CPU: Core i7 3770(3.4GHz,4core/8thread)
- Memory: 32GB(DDR3-12800 8GBx4)
- HDD: 1TB(SATA,7200rpm)
- GPU: ETSK20-5GER(nvidia Tesla K20c)
ETSK20-5GERにはディスプレイ出力端子(D-SUB,DVI,HDMIなど)が無いため ~
UEFIの設定でPrimary DisplayをOn Boardに設定し、ディスプレイはM/B上の ~
出力端子に接続しています。 ~
* CentOS 6.4(64bit版) のインストール [#z1f9e64b]
CentOS 6.4(64bit版)インストール概要は以下のとおりです。 ~
- 言語、キーボード: 日本語
- パッケージ: 標準デスクトップインストール
- HDD パーティション: 全領域使用、標準設定
- ネットワーク: DHCP
** CentOS インストール後設定 [#db8c96a0]
CentOS 6.4(64bit版)インストール後の設定について記載します。 ~
** CentOSのアップデート [#sf692f14]
インストール直後のKernelバージョンは以下のとおりです。
$ uname -a
Linux localhost.localdomain 2.6.32-358.el6.x86_64 #1 SMP Fri Feb 22 00:31:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
パッケージ全体のアップデートを実行します。 ~
# yum update
アップデート完了後再起動を実行しアップデートしたKernelで起動することを確認します。~
# reboot
再起動後のKernelバージョンは以下のとおりです。
$ uname -a
Linux localhost.localdomain 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
beatユーザを作成し、sudoにbeatユーザを追加します。
# useradd beat
# passwd beat
# /usr/sbin/visudo
...<略>
## user MACHINE=COMMANDS
##
## The COMMANDS section may have other options added to it.
##
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
beat ALL=(ALL) ALL
** パッケージ追加と設定 [#i1de06fb]
CUDAのインストールには直接関係はありませんが、作業をしやすくするため ~
ntpdとopensshをインストールします。 ~
~
ntpdをインストールします。~
# yum install ntp
ntpサーバを追加します。 ~
# vi /etc/ntp/step-tickers
# List of servers used for initial synchronization.
ntp.nict.jp
ntp.jst.mfeed.ad.jp
ntp.ring.gr.jp
ntpdを起動します。~
# /etc/init.d/ntpd start
ntpdをサービスに追加します。 ~
# chkconfig --level 3 ntpd on
# chkconfig --level 5 ntpd on
opensshをインストールします。~
既にインストールされている場合はこの手順はとばしてください。~
# yum install openssh
/etc/ssh/sshd_config内のPermitRootLoginと~
PermitEmptyPasswordsをnoに設定します。~
# vi /etc/ssh/sshd_config
... <略>
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
... <略>
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
PermitEmptyPasswords no
PasswordAuthentication yes
...
sshdを起動します。 ~
# /etc/init.d/sshd start
sshdをサービスに追加します。
# chkconfig --level 5 sshd on
# chkconfig --level 3 sshd on
* Tesla K20cドライバインストール [#n811fcbc]
Tesla K20cドライバインストールについて記載します。~
** Tesla K20cドライバインストール準備 [#k7d204e8]
Tesla K20cドライバインストールのためにパッケージの追加、設定を行います。~
開発用パッケージ、ライブラリ群(Development tools)をインストールします。~
# yum groupinstall 'Development tools'
Tesla K20cのドライバ、CUDA5のインストール時にXが起動していると ~
エラーが起こるため、runlevel 3に変更し再起動を行います。 ~
# vi /etc/inittab
...<略>
# Default runlevel. The runlevels used are:
# 0 - halt (Do NOT set initdefault to this)
# 1 - Single user mode
# 2 - Multiuser, without NFS (The same as 3, if you do not have networking)
# 3 - Full multiuser mode
# 4 - unused
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this)
#
id:3:initdefault:
# reboot
** Tesla K20cドライバのダウンロード [#w3abdcaf]
以下のURLよりNVIDIA-Linux-x86_64-319.23.runをダウンロードします。~
http://www.nvidia.co.jp/object/linux-display-amd64-319.23-driver-jp.html ~
~
NVIDIA-Linux-x86_64-319.23.runを実行し、ライセンスに同意後インストールが完了します。~
/proc/driver/nvidia/にversionファイルが作成されます。~
# chmod +x NVIDIA-Linux-x86_64-319.23.run
# ./NVIDIA-Linux-x86_64-319.23.run
# cat /proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86_64 Kernel Module 304.54 Sat Sep 29 00:05:49 PDT 2012
GCC version: gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC)
起動時にドライバを読み込むためのファイル(/etc/init.d/nvidia)を作成し、~
runlevel3,5の起動時に読み込む用設定します。~
http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/index.html#install-cuda-software ~
# vi /etc/init.d/nvidia
#!/bin/bash
/sbin/modprobe nvidia
if [ "$?" -eq 0 ]; then
# Count the number of NVIDIA controllers found.
NVDEVS=`lspci | grep -i NVIDIA`
N3D=`echo "$NVDEVS" | grep "3D controller" | wc -l`
NVGA=`echo "$NVDEVS" | grep "VGA compatible controller" | wc -l`
N=`expr $N3D + $NVGA - 1`
for i in `seq 0 $N`; do
mknod -m 666 /dev/nvidia$i c 195 $i
done
mknod -m 666 /dev/nvidiactl c 195 255
else
exit 1
fi
# cd /etc/rc5.d/
# ln -s S99nvidia ../init.d/nvidia
# cd /etc/rc3.d/
# ln -s S99nvidia ../init.d/nvidia
* CUDA5のインストールとSampleの実行 [#gbfa8ff5]
CUDA5のインストールとCUDA5のSamplesについて記載します。~
** CUDA5のダウンロード [#ge140c64]
CentOS6 64bit版CUDA(cuda_5.0.35_linux_64_rhel6.x-1.run)を以下のURLから
ダウンロードします。~
https://developer.nvidia.com/cuda-downloads ~
~
CUDA5のSampleインストール時にPATHが見つからずSampleがインストールされないのを防ぐため、~
.bashrcに予めPATHを追加します。 ~
$ cd /home/beat
$ vi .bashrc
# .bashrc
# Source global definitions
if [ -f /etc/bashrc ]; then
. /etc/bashrc
fi
# User specific aliases and functions
export PATH=/usr/local/cuda-5.0/bin:$PATH
export LD_LIBRARY_PATH=/usr/local/cuda-5.0/lib64:/usr/local/cuda-5.0/lib:$LD_LIBRARY_PATH
# source .bashrc
** パッケージのインストール [#md50346c]
Samplesのビルドで必要な以下のパッケージを予めインストールします。~
# yum install freeglut-devel.x86_64 libXi-devel.x86_64 mpich2-devel.x86_64 libXmu-devel.x86_64
cuda_5.0.35_linux_64_rhel6.x-1.run を実行します。~
インストール先ディレクトリはデフォルトの/usr/local/cuda-5.0を指定します。~
# chmod +x cuda_5.0.35_linux_64_rhel6.x-1.run
# ./cuda_5.0.35_linux_64_rhel6.x-1.run
Samplesはデフォルトで/usr/local/cuda-5.0/samplesと/root/NVIDIA_CUDA-5.0_Samplesに
インストールされます。~
~
rootユーザでビルドできるようにld.so.conf.d/cuda.confを追加しldconfigを実行します。~
# cat /etc/ld.so.conf.d/cuda.conf
/usr/local/cuda-5.0/lib
/usr/local/cuda-5.0/lib64
# ldconfig
** CUDA5 Samplesのビルドと実行 [#v02860fe]
NVIDIA_CUDA-5.0_Samplesをbeatユーザでビルド、実行できるようにします。~
/root/NVIDIA_CUDA-5.0_Samplesからコピーし、オーナーをbeatに変更しmakeを実行します。~
# cp -afr /root/NVIDIA_CUDA-5.0_Samples /home/beat/.
# cd /home/beat
# chown -R beat.beat NVIDIA_CUDA-5.0_Samples
$ cd ~/NVIDIA_CUDA-5.0_Samples
$ make
ビルド完了後 NVIDIA_CUDA-5.0_Samples/bin/linux/release/に移動し、~
NVIDIA CUDA Getting Started Guide for Linuxのページ内Running the Binariesに ~
記載されているdeviceQuery、bandwidthTestを実行します。 ~
deviceQuery、bandwidthTest共にTesla K20cを用いていることが確認できます。~
~
http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/index.html#running-binaries ~
$ cd ~/NVIDIA_CUDA-5.0_Samples/bin/linux/release/
$ ./deviceQuery
./deviceQuery Starting...
CUDA Device Query (Runtime API) version (CUDART static linking)
Detected 1 CUDA Capable device(s)
Device 0: "Tesla K20c"
CUDA Driver Version / Runtime Version 5.0 / 5.0
CUDA Capability Major/Minor version number: 3.5
Total amount of global memory: 4800 MBytes (5032706048 bytes)
(13) Multiprocessors x (192) CUDA Cores/MP: 2496 CUDA Cores
GPU Clock rate: 706 MHz (0.71 GHz)
Memory Clock rate: 2600 Mhz
Memory Bus Width: 320-bit
L2 Cache Size: 1310720 bytes
Max Texture Dimension Size (x,y,z) 1D=(65536), 2D=(65536,65536), 3D=(4096,4096,4096)
Max Layered Texture Size (dim) x layers 1D=(16384) x 2048, 2D=(16384,16384) x 2048
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 2048
Maximum number of threads per block: 1024
Maximum sizes of each dimension of a block: 1024 x 1024 x 64
Maximum sizes of each dimension of a grid: 2147483647 x 65535 x 65535
Maximum memory pitch: 2147483647 bytes
Texture alignment: 512 bytes
Concurrent copy and kernel execution: Yes with 2 copy engine(s)
Run time limit on kernels: No
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support: Enabled
Device supports Unified Addressing (UVA): Yes
Device PCI Bus ID / PCI location ID: 1 / 0
Compute Mode:
< Default (multiple host threads can use ::cudaSetDevice() with device simultaneously) >
deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 5.0, CUDA Runtime Version = 5.0, NumDevs = 1, Device0 = Tesla K20c
$ ./bandwidthTest
[CUDA Bandwidth Test] - Starting...
Running on...
Device 0: Tesla K20c
Quick Mode
Host to Device Bandwidth, 1 Device(s)
PINNED Memory Transfers
Transfer Size (Bytes) Bandwidth(MB/s)
33554432 6431.7
Device to Host Bandwidth, 1 Device(s)
PINNED Memory Transfers
Transfer Size (Bytes) Bandwidth(MB/s)
33554432 6396.1
Device to Device Bandwidth, 1 Device(s)
PINNED Memory Transfers
Transfer Size (Bytes) Bandwidth(MB/s)
33554432 143752.5
** 設定完了後のHDD使用容量 [#c97ef8c4]
設定完了後のHDDの使用容量は以下のとおりです。~
# df -h
Filesystem Size Used Avail Use% マウント位置
/dev/mapper/vg_beattesla-lv_root
50G 4.3G 45G 9% /
tmpfs 16G 0 16G 0% /dev/shm
/dev/sda1 485M 66M 394M 15% /boot
/dev/mapper/vg_beattesla-lv_home
852G 1.4G 808G 1% /home
* 更新履歴 [#cbed8220]
2013/05/31 初稿掲載 ~