bc10/x-loader
[
Front page
] [
New
|
List of pages
|
Search
|
Recent changes
]
Start:
[[bc10/Software]]
- Contents
#contents
* Summary [#tb139168]
>This section shows the basic information of how to build...
bc10 as power is on. X-Loader used here is originally dev...
the building method for BeagleBoard's can be applicable t...
bc10 and the placement of X-Loader is available at [[bc10...
* Building X-loader [#y23cc303]
** Development Environment [#w2f3e169]
>
- Prepare toolchain for bc10.
- Examine whether the two toolchains described below are ...
-- arm GNU/Linux toolchain (arm-none-linux-gnueabi-) deve...
-- OpenEmbed Linux's toolchain (arm-angstrom-linux-gnueab...
development environment of BeagleBoard.
- This section mainly explains the case that the toolchai...
** Set up environment variable [#c82b2829]
>
- To use the toolchain of OpenEmbedded, set up the enviro...
export PATH=${WORK_DIR}/OE/angstrom-dev/cross/armv7a/bin...
export ARCH=arm
export CROSS_COMPILE=arm-angstrom-linux-gnueabi-
** Obtain the source code [#x67993df]
>
-Obtain the source code of X-Loder for bc10 from git repo...
modified for installing Android-2.2_1.1 (Froyo) on bc10.
git clone git://gitorious.org/~bc-dev/x-load-omap3/x-loa...
cd x-load-bc10/
git checkout -t -b bc10 origin/bc10
- Get the source code of X-Loader for OMAP3 from the git ...
divices in general.
git clone git://gitorious.org/x-load-omap3/mainline.git ...
cd xloader/
~
** Build [#k30d255e]
>
- Let the build process for bc10 begin.
make distclean
make omap3530bc10_config
make
~
- Start the build process for OMAP3/beagleboard clones.
make distclean
make omap3530beagle_config
make
- If build is succeeded, x-load.bin is produced.
** Adjusting binary image [#a8bbdc5b]
>
- Since x-load.bin does not match the format and specific...
and SD Card as a bootloader. To solve this issue, x-load....
tool that adds a new header to the image file of X-Loder....
- The executable file of signGP can be download URL below
-- http://beagleboard.googlecode.com/files/signGP
- This is how to use signGP.
./signGP x-load.bin
- x-load.bin.ift is produced if signGP has successfully c...
-Because of the specifications of BootROM, X-Loder is ne...
order. The newly created X-Loader file is needed to be ch...
directory. For farther questions about placing X-Loader, ...
** About source repository [#u82e5168]
>
The Source code of '''X-load-bc10''' is managed by Gitori...
- Project page
-- [[http://gitorious.org/~bc-dev/x-load-omap3/x-load-bc1...
- Repository
-- git://gitorious.org/~bc-dev/x-load-omap3/x-load-bc10.git
*** Branch [#j0fdbc6b]
>
There are three branches in '''x-load-bc10''' repository.
- master
-- The clone of the original master branch
- bc10
-- The release branch for bc10
- bc10-develop
-- The developing branch for bc10
>
To build a '''x-load.bin''' for bc10, please use the bc10...
*** Origins [#va5d5983]
>
The source code of '''x-load-bc10''' is cloned from the r...
and the original is modified for bc10, specifically.~
- x-load-omap3 project
-- [[http://gitorious.org/x-load-omap3]]
- Repository
-- git://gitorious.org/x-load-omap3/mainline.git
- Branch
-- master
** About signGP [#g0056673]
>
As BootROM code of OMAP35x accesses and reads NAND Flash...
the top of the image file of the bootloder. The header is...
+------------------------------------------+
| Length (4byte) |
+------------------------------------------+
| LoadAddr (4byte) |
+------------------------------------------+
| BootLoader image |
| ... |
+------------------------------------------+
-- Length
--- This determines the size of the image file.
-- LoadAddr
--- It points out the address of the image file.~
>
signGP is a tool, which adds a new simple header to the i...
The source file is available at [[BeagleSourceCode:http:/...
* Reference [#r156bc16]
>
- [[x-load-omap3 (gitorious.org):http://gitorious.org/x-l...
- [[elinux BeagleBoard X-Loader (elinux.org):http://elinu...
- [[BeagleSoftCompile (code.google.com):http://code.googl...
- [[BeagleSourceCode (code.google.com):http://code.google...
*Revision History [#d2092c1e]
>
2010/07/23 Initial release~
2010/09/16 Add git repository for the bc10 (froyo) specif...
2011/01/11 Reorganize the article~
End:
[[bc10/Software]]
- Contents
#contents
* Summary [#tb139168]
>This section shows the basic information of how to build...
bc10 as power is on. X-Loader used here is originally dev...
the building method for BeagleBoard's can be applicable t...
bc10 and the placement of X-Loader is available at [[bc10...
* Building X-loader [#y23cc303]
** Development Environment [#w2f3e169]
>
- Prepare toolchain for bc10.
- Examine whether the two toolchains described below are ...
-- arm GNU/Linux toolchain (arm-none-linux-gnueabi-) deve...
-- OpenEmbed Linux's toolchain (arm-angstrom-linux-gnueab...
development environment of BeagleBoard.
- This section mainly explains the case that the toolchai...
** Set up environment variable [#c82b2829]
>
- To use the toolchain of OpenEmbedded, set up the enviro...
export PATH=${WORK_DIR}/OE/angstrom-dev/cross/armv7a/bin...
export ARCH=arm
export CROSS_COMPILE=arm-angstrom-linux-gnueabi-
** Obtain the source code [#x67993df]
>
-Obtain the source code of X-Loder for bc10 from git repo...
modified for installing Android-2.2_1.1 (Froyo) on bc10.
git clone git://gitorious.org/~bc-dev/x-load-omap3/x-loa...
cd x-load-bc10/
git checkout -t -b bc10 origin/bc10
- Get the source code of X-Loader for OMAP3 from the git ...
divices in general.
git clone git://gitorious.org/x-load-omap3/mainline.git ...
cd xloader/
~
** Build [#k30d255e]
>
- Let the build process for bc10 begin.
make distclean
make omap3530bc10_config
make
~
- Start the build process for OMAP3/beagleboard clones.
make distclean
make omap3530beagle_config
make
- If build is succeeded, x-load.bin is produced.
** Adjusting binary image [#a8bbdc5b]
>
- Since x-load.bin does not match the format and specific...
and SD Card as a bootloader. To solve this issue, x-load....
tool that adds a new header to the image file of X-Loder....
- The executable file of signGP can be download URL below
-- http://beagleboard.googlecode.com/files/signGP
- This is how to use signGP.
./signGP x-load.bin
- x-load.bin.ift is produced if signGP has successfully c...
-Because of the specifications of BootROM, X-Loder is ne...
order. The newly created X-Loader file is needed to be ch...
directory. For farther questions about placing X-Loader, ...
** About source repository [#u82e5168]
>
The Source code of '''X-load-bc10''' is managed by Gitori...
- Project page
-- [[http://gitorious.org/~bc-dev/x-load-omap3/x-load-bc1...
- Repository
-- git://gitorious.org/~bc-dev/x-load-omap3/x-load-bc10.git
*** Branch [#j0fdbc6b]
>
There are three branches in '''x-load-bc10''' repository.
- master
-- The clone of the original master branch
- bc10
-- The release branch for bc10
- bc10-develop
-- The developing branch for bc10
>
To build a '''x-load.bin''' for bc10, please use the bc10...
*** Origins [#va5d5983]
>
The source code of '''x-load-bc10''' is cloned from the r...
and the original is modified for bc10, specifically.~
- x-load-omap3 project
-- [[http://gitorious.org/x-load-omap3]]
- Repository
-- git://gitorious.org/x-load-omap3/mainline.git
- Branch
-- master
** About signGP [#g0056673]
>
As BootROM code of OMAP35x accesses and reads NAND Flash...
the top of the image file of the bootloder. The header is...
+------------------------------------------+
| Length (4byte) |
+------------------------------------------+
| LoadAddr (4byte) |
+------------------------------------------+
| BootLoader image |
| ... |
+------------------------------------------+
-- Length
--- This determines the size of the image file.
-- LoadAddr
--- It points out the address of the image file.~
>
signGP is a tool, which adds a new simple header to the i...
The source file is available at [[BeagleSourceCode:http:/...
* Reference [#r156bc16]
>
- [[x-load-omap3 (gitorious.org):http://gitorious.org/x-l...
- [[elinux BeagleBoard X-Loader (elinux.org):http://elinu...
- [[BeagleSoftCompile (code.google.com):http://code.googl...
- [[BeagleSourceCode (code.google.com):http://code.google...
*Revision History [#d2092c1e]
>
2010/07/23 Initial release~
2010/09/16 Add git repository for the bc10 (froyo) specif...
2011/01/11 Reorganize the article~
Page: