bc10/get started
[
Front page
] [
New
|
List of pages
|
Search
|
Recent changes
]
Start:
[[bc10]]
-Contents
#CONTENTS
* Overview [#i1d6c351]
>
bc10 is an Open Source Gadget, which is equipped with Tex...
BeagleBoard, it is capable of running the Android 2.2_1.1...
Linux OSes. A 6-axis motion sensor and a 20ch GPS receive...
camera module is a standard equipment. Moreover, at both ...
so users can design own expansion board for needs. Thus, ...
>
For the specifications of bc10, please visit [[bc10/Hardw...
>
Before start working on bc10, please read the sections be...
* What is in the Box (Caution: this is for the owner of b...
>
These 4 items are in the box. Please check before start w...
||||h
|CENTER:1|Main Board|CENTER: x1|
|CENTER:2|4.3" wide AMOLED|CENTER: x1|
|CENTER:3|CMOS Camera Module|CENTER: x1|
|CENTER:4|Extension Board (including power cable¹)|C...
¹ The power cable is used for connecting between pow...
- SD card, AC adaptor, serial cable, JTAG cable are not i...
Users may make these cables.~
- bc10 can be currently booted form SD card. The microSD ...
of booting from NAND Flash will be published the near fut...
* Register to Mailing List [#i1ec95d8]
>
Since all questions about bc10 are handled at its mailing...
To share the technical information with other users, ques...
the engineers at BeatCraft respond to the questions. Sinc...
list, it requires the approval from the group owner.~
* How to Install OS [#wec79b89]
>
On bc10, OS is booted from SD card. There are two ways to...
in BC::labs, download the source of the OS, and build it....
image of an OS, and place it to a SD card.~
>
- Android 2.2_1.1 (Froyo)~
-- Downloading the prebuild image and creating bootable S...
http://labs.beatcraft.com/en/index.php?bc10%2Fprebuild%20...
-- Creating boot image and bootable SD card.~
http://labs.beatcraft.com/en/index.php?bc10%2Ffroyo
>
- OpenEmbedded Linix (Angstrom)~
-- Creating boot image and bootable SD card.~
http://labs.beatcraft.com/en/index.php?bc10%2FOpenEmbedde...
* Matters That Require Attention [#j67899b6]
- On the included expansion board, a short cable is attac...
some issues. Please be careful when the cable is connecte...
- Power supply of Main Board is from USB mini B connector...
which provides 5V, and it comes with a USB mini B plug. A...
works fine with bc10.~
-SD card is not included, and SD cards are provided by us...
of ?[[How to Install OS:http://labs.beatcraft.com/en/inde...
-bc10 is generally booted from the SD card drive. The mic...
- Other frequently asked questions are listed on [[bc10/F...
* Others [#l1dbb3a2]
>
If there are farther questions, please submit the questio...
* Revision History [#lca77f3e]
>
-2010/10/08 The article is initially uploaded.
End:
[[bc10]]
-Contents
#CONTENTS
* Overview [#i1d6c351]
>
bc10 is an Open Source Gadget, which is equipped with Tex...
BeagleBoard, it is capable of running the Android 2.2_1.1...
Linux OSes. A 6-axis motion sensor and a 20ch GPS receive...
camera module is a standard equipment. Moreover, at both ...
so users can design own expansion board for needs. Thus, ...
>
For the specifications of bc10, please visit [[bc10/Hardw...
>
Before start working on bc10, please read the sections be...
* What is in the Box (Caution: this is for the owner of b...
>
These 4 items are in the box. Please check before start w...
||||h
|CENTER:1|Main Board|CENTER: x1|
|CENTER:2|4.3" wide AMOLED|CENTER: x1|
|CENTER:3|CMOS Camera Module|CENTER: x1|
|CENTER:4|Extension Board (including power cable¹)|C...
¹ The power cable is used for connecting between pow...
- SD card, AC adaptor, serial cable, JTAG cable are not i...
Users may make these cables.~
- bc10 can be currently booted form SD card. The microSD ...
of booting from NAND Flash will be published the near fut...
* Register to Mailing List [#i1ec95d8]
>
Since all questions about bc10 are handled at its mailing...
To share the technical information with other users, ques...
the engineers at BeatCraft respond to the questions. Sinc...
list, it requires the approval from the group owner.~
* How to Install OS [#wec79b89]
>
On bc10, OS is booted from SD card. There are two ways to...
in BC::labs, download the source of the OS, and build it....
image of an OS, and place it to a SD card.~
>
- Android 2.2_1.1 (Froyo)~
-- Downloading the prebuild image and creating bootable S...
http://labs.beatcraft.com/en/index.php?bc10%2Fprebuild%20...
-- Creating boot image and bootable SD card.~
http://labs.beatcraft.com/en/index.php?bc10%2Ffroyo
>
- OpenEmbedded Linix (Angstrom)~
-- Creating boot image and bootable SD card.~
http://labs.beatcraft.com/en/index.php?bc10%2FOpenEmbedde...
* Matters That Require Attention [#j67899b6]
- On the included expansion board, a short cable is attac...
some issues. Please be careful when the cable is connecte...
- Power supply of Main Board is from USB mini B connector...
which provides 5V, and it comes with a USB mini B plug. A...
works fine with bc10.~
-SD card is not included, and SD cards are provided by us...
of ?[[How to Install OS:http://labs.beatcraft.com/en/inde...
-bc10 is generally booted from the SD card drive. The mic...
- Other frequently asked questions are listed on [[bc10/F...
* Others [#l1dbb3a2]
>
If there are farther questions, please submit the questio...
* Revision History [#lca77f3e]
>
-2010/10/08 The article is initially uploaded.
Page: