bc10/JTAG
[
Front page
] [
New
|
List of pages
|
Search
|
Recent changes
]
Start:
[[bc10/Hardware]]
- Contents
#CONTENTS
* Overview [#p0e251a8]
>
bc10 does not include JTAG in the set. Users need to make...
bc10. The example of JTAG consists of several parts: JTAG...
and JTAG Adapter Board, a part of [[BeagleBoard Adapter K...
products for BeagleBoard. Users need to work on JTAG cab...
BeagleBoard's, but the size of bc10's JTAG connector is ...
#ref(bc10jtag.jpg,,75%)~
* JTAG board [#p3efb9f2]
** Flyswatter [#h8b32932]
>
The JTAG board is called [[Flyswatter>http://www.tincanto...
attached to bc10 via a 14-pin bc10 specific JTAG cable. F...
#ref(bc10jtag01.jpg,,50%)~
** JTAG Adapter Board [#cac4a530]
>
JTAG Adapter Board is part of [[BeagleBoard Adapter Kit>h...
to the bc10 specific JTAG cable.
#ref(bc10jtag02.jpg,,50%)~
* bc10 Specific JTAG Cable [#yb8013d4]
>
The pin order of bc10's JTAG connector is the same as Bea...
different size of JTAG connector from BeagleBoard. This p...
instructions of how to make the JTAG cable for bc10 are s...
** Parts Table [#a4fa8829]
>
|||||h
|Connector socket housing|CENTER:1|DF13-14S-1.25C|http://...
|Connector contact |CENTER:14|DF13-2630SCF|http://search....
|Ribbon Cable|CENTER:1| approx. 200 ~ 250 mm| 1.27 mm pit...
|IDC connector|CENTER:1||2.54 mm pitch, 14 positions, 2ro...
** Instructions [#uaab7ef3]
>
+ Split an edge of the ribbon cable 40mm deep.
+ Push the split ribbon cable into '''the connector conta...
+ From the first pin, the pins of '''the connector conta...
+ The other end of the ribbon cable is pushed into '''the...
to be the same as its corresponding pin is originally put...
+ This is the end.
** The Picture of Example Cable [#fc19eec7]
>
&ref(CIMG8559.JPG,,25%);
** Pin Assignment [#hed6d06f]
>
|No.|Signal||
|1|JTAG_TMS||
|2|JTAG_nTRST||
|3|JTAG_TDI||
|4|GND||
|5|Vcc|1.8v|
|6|NC||
|7|JTAG_TDO||
|8|GND||
|9|JTAG_RTCK||
|10|GND||
|11|JTAG_TCK||
|12|GND||
|13|JTAG_EMU0||
|14|JTAG_EMU1||
* Revision History [#p0544bdd]
>
2010/10/12 The article is initially uploaded.
End:
[[bc10/Hardware]]
- Contents
#CONTENTS
* Overview [#p0e251a8]
>
bc10 does not include JTAG in the set. Users need to make...
bc10. The example of JTAG consists of several parts: JTAG...
and JTAG Adapter Board, a part of [[BeagleBoard Adapter K...
products for BeagleBoard. Users need to work on JTAG cab...
BeagleBoard's, but the size of bc10's JTAG connector is ...
#ref(bc10jtag.jpg,,75%)~
* JTAG board [#p3efb9f2]
** Flyswatter [#h8b32932]
>
The JTAG board is called [[Flyswatter>http://www.tincanto...
attached to bc10 via a 14-pin bc10 specific JTAG cable. F...
#ref(bc10jtag01.jpg,,50%)~
** JTAG Adapter Board [#cac4a530]
>
JTAG Adapter Board is part of [[BeagleBoard Adapter Kit>h...
to the bc10 specific JTAG cable.
#ref(bc10jtag02.jpg,,50%)~
* bc10 Specific JTAG Cable [#yb8013d4]
>
The pin order of bc10's JTAG connector is the same as Bea...
different size of JTAG connector from BeagleBoard. This p...
instructions of how to make the JTAG cable for bc10 are s...
** Parts Table [#a4fa8829]
>
|||||h
|Connector socket housing|CENTER:1|DF13-14S-1.25C|http://...
|Connector contact |CENTER:14|DF13-2630SCF|http://search....
|Ribbon Cable|CENTER:1| approx. 200 ~ 250 mm| 1.27 mm pit...
|IDC connector|CENTER:1||2.54 mm pitch, 14 positions, 2ro...
** Instructions [#uaab7ef3]
>
+ Split an edge of the ribbon cable 40mm deep.
+ Push the split ribbon cable into '''the connector conta...
+ From the first pin, the pins of '''the connector conta...
+ The other end of the ribbon cable is pushed into '''the...
to be the same as its corresponding pin is originally put...
+ This is the end.
** The Picture of Example Cable [#fc19eec7]
>
&ref(CIMG8559.JPG,,25%);
** Pin Assignment [#hed6d06f]
>
|No.|Signal||
|1|JTAG_TMS||
|2|JTAG_nTRST||
|3|JTAG_TDI||
|4|GND||
|5|Vcc|1.8v|
|6|NC||
|7|JTAG_TDO||
|8|GND||
|9|JTAG_RTCK||
|10|GND||
|11|JTAG_TCK||
|12|GND||
|13|JTAG_EMU0||
|14|JTAG_EMU1||
* Revision History [#p0544bdd]
>
2010/10/12 The article is initially uploaded.
Page: