bc10/Breakout
[
Front page
] [
New
|
List of pages
|
Search
|
Recent changes
]
Start:
[[bc10]]
*Breakout [#t2d8a743]
>
This is the information of a Breakout board, which is con...
This Breakout is attached to the left side (from AMOLED) ...
standard (included) Expansion Board is connected.~
- Design
-- Schematic and Gerber data
||OrCAD format|pdf format|
|回路図|&ref(bc10-008-0001.dsn);|&ref(b...
|Gerber|&ref(bc10-008-0001.zip);|&ref(bc10-008-0001.pdf);|
~
-- Parts List
|Product Category|Product ID Number|Maker|Quantity|Memo|
|CENTER:Connector|14 5078 030 510 861+|KYOCERA ELCO|CENTE...
** Sample #1 (Barometer sensor) [#taa89744]
>
The barometer module, AE-SCP1000-D01, is used for this sa...
>
- Schematic~
&ref(bc10-002-0003.pdf);~
The schematic is only available. Since no boards are crea...
>
- Description~
The barometer module works between 2.4~3.3V (standard 2.7...
SPI connection. For this sample, the 2.85V output LDO (Lo...
is selected. If output voltage (including the margin of e...
with other makers' ICs here. (To use other power supply I...
~
※ For bc10, 3.3V output includes the margin of erro...
voltage highly unlikely causes malfunctions on this barom...
use this Power Supply IC and reduce the voltage at 2.85V.~
~
The digital interface of bc10 is 1.8V level, and this mod...
two devices, it may cause damages on bc10.) To connect th...
1.8V and 2.85V. For the connection, a Voltage Conversion ...
mount, a pitch converter board is used for mounting this ...
~
bc10 and the barometer sensor module is attached via a th...
and one line of TRG and DRDY (totally 2) are connected. ...
and GPIO_153, respectively).~
~
On the sample, the empty pins are remain open. There are ...
more stable condition, pull-up resistors can be applied.~
>
-Parts
|Product Name|Quantity|Specs|Memo|h
|bc10 expansion board|1|||
|Barometer sensor module|1||http://akizukidenshi.com/cata...
|IC socket DIP-8|1|8 pin|http://akizukidenshi.com/catalog...
|Pin Header 2x40|1||Divided into 2x5 http://akizukidensh...
|Voltage Converter IC|1|TXB0108|http://focus.tij.co.jp/jp...
|Pitch converter board |1||http://www.sunhayato.co.jp/pro...
|Power Supply IC 2.85V|1|SI91841DT-285|http://akizukidens...
|Ceramic capacitor |1|0.01uF|This depends on the type of ...
|Ceramic capacitor|2|0.1uF||
|Ceramic capacitor|2|1uF|This depends on the size of the ...
-- 0.01μF and 1μF ceramic capacitors are for us...
please study its recommended circuit, first.
-- Pin Headers are divided into 2 groups (2x5) and used.
~
- Instructions~
Go through whole assembly process before actually start w...
-- Each part is placed where is should be, and examine th...
-- Wire the Power Supply IC (S191841DT-285) at empty spac...
so that please be careful with short circuit. To use the ...
-- The IC socket, which is attached to the barometer modu...
-- the voltage converter IC is mounted on to the pitch co...
-- Wire each connector.
-- Mounted Side 1~
&ref(CIMG8723.JPG,,25%);~
?- Mounted Side 2~
&ref(CIMG8724.JPG,,25%);~
-- The Barometer module is mounted~
&ref(CIMG8725.JPG,,25%);~
- To test the operation~
This is a shell script for testing its operation. This sh...
&ref(scp1000_test.sh);~
---
** Sample #2 (Thermometer sensor) [#hb74b6d6]
>
A thermometer sensor and an AD converter are used for thi...
- Schematic~
&ref(bc10-002-0006.pdf);~
The schematic is only available. Since any boards are not...
- Description~
The thermometer sensor is an analog output type sensor, w...
It outputs 10.0mV per 1 degree Celsius, and it can measu...
Since the expansion board connectors of bc10 do not have ...
digital values via an analog-digital converter. Both ther...
2.7~5.5V, and bc10 provide power to the sensor and conver...
of bc10 requires at level of 1.8V, so it cannot connect d...
To connect these devices, the signal is needed to transfe...
This IC is not surface mount type, and a pitch converter ...
~
As long as keeping pairs A1~A8 with B1~B8, a pair can be ...
and 3.3V is always on B-side. bc10 and the analog-digital...
4 lines of SPI (CLK, MISI, MISO, and CS) are occupied.~
~
On the sample, the empty pins are remain open. There are ...
in far more stable condition, pull-up resistors can be ap...
|Product Name|Quantity|Specs|Memo|h
|bc10 expansion board|1|||
|Thermometer Sensor|2|MCP9700-E/TO|http://akizukidenshi.c...
|analog-digital converter |1|MCP3204|http://akizukidenshi...
|IC Socket DIP-14|1|14 Pin|http://akizukidenshi.com/catal...
|Pin Header 2x40|1||This can be divided into 2x5. http:/...
|Voltage converter IC|1|TXB0108|http://focus.tij.co.jp/jp...
|Pitch converter board|1||http://www.sunhayato.co.jp/prod...
|Ceramic capaciters|5|0.1uF||
-- One package of the thermometers contain 8 thermometer ...
in the expansion board, two thermometer sensors are used....
(As using 1 thermometer, four (4) 0.1μF-ceramic cap...
-- In this sample, both ceramic disk type and surface-mou...
-- The pin-headers are divided into 2 sets of 2x5 size.~
-- The data sheet of analog-digital converter is availabl...
This site is highly recommended for a reference.~
~
- Instructions~
Please read through whole section carefully before start ...
-- Each part is placed where is should be, and examine th...
-- The IC socket for the analog-digital converter and cer...
-- The thermometer sensors are put into the place.
-- Wire placed parts. The wires, which are going to attac...
wires are connected to the IC socket. Reminder that the v...
and keep enough room for mounting the voltage converter I...
-- Mount the voltage converter IC on the pitch converter...
Pin Headers, which are on the expansion board.~
-- All connectors are wired.~
-- Mounted Side 1~
&ref(CIMG8745.JPG,,25%);~
-- Mounted Side 2~
&ref(CIMG8746.JPG,,25%);~
* History of Revision [#df60e7f1]
>
- 2010/10/28 This article is initially uploaded.
- 2010/11/29 The samples are added.
End:
[[bc10]]
*Breakout [#t2d8a743]
>
This is the information of a Breakout board, which is con...
This Breakout is attached to the left side (from AMOLED) ...
standard (included) Expansion Board is connected.~
- Design
-- Schematic and Gerber data
||OrCAD format|pdf format|
|回路図|&ref(bc10-008-0001.dsn);|&ref(b...
|Gerber|&ref(bc10-008-0001.zip);|&ref(bc10-008-0001.pdf);|
~
-- Parts List
|Product Category|Product ID Number|Maker|Quantity|Memo|
|CENTER:Connector|14 5078 030 510 861+|KYOCERA ELCO|CENTE...
** Sample #1 (Barometer sensor) [#taa89744]
>
The barometer module, AE-SCP1000-D01, is used for this sa...
>
- Schematic~
&ref(bc10-002-0003.pdf);~
The schematic is only available. Since no boards are crea...
>
- Description~
The barometer module works between 2.4~3.3V (standard 2.7...
SPI connection. For this sample, the 2.85V output LDO (Lo...
is selected. If output voltage (including the margin of e...
with other makers' ICs here. (To use other power supply I...
~
※ For bc10, 3.3V output includes the margin of erro...
voltage highly unlikely causes malfunctions on this barom...
use this Power Supply IC and reduce the voltage at 2.85V.~
~
The digital interface of bc10 is 1.8V level, and this mod...
two devices, it may cause damages on bc10.) To connect th...
1.8V and 2.85V. For the connection, a Voltage Conversion ...
mount, a pitch converter board is used for mounting this ...
~
bc10 and the barometer sensor module is attached via a th...
and one line of TRG and DRDY (totally 2) are connected. ...
and GPIO_153, respectively).~
~
On the sample, the empty pins are remain open. There are ...
more stable condition, pull-up resistors can be applied.~
>
-Parts
|Product Name|Quantity|Specs|Memo|h
|bc10 expansion board|1|||
|Barometer sensor module|1||http://akizukidenshi.com/cata...
|IC socket DIP-8|1|8 pin|http://akizukidenshi.com/catalog...
|Pin Header 2x40|1||Divided into 2x5 http://akizukidensh...
|Voltage Converter IC|1|TXB0108|http://focus.tij.co.jp/jp...
|Pitch converter board |1||http://www.sunhayato.co.jp/pro...
|Power Supply IC 2.85V|1|SI91841DT-285|http://akizukidens...
|Ceramic capacitor |1|0.01uF|This depends on the type of ...
|Ceramic capacitor|2|0.1uF||
|Ceramic capacitor|2|1uF|This depends on the size of the ...
-- 0.01μF and 1μF ceramic capacitors are for us...
please study its recommended circuit, first.
-- Pin Headers are divided into 2 groups (2x5) and used.
~
- Instructions~
Go through whole assembly process before actually start w...
-- Each part is placed where is should be, and examine th...
-- Wire the Power Supply IC (S191841DT-285) at empty spac...
so that please be careful with short circuit. To use the ...
-- The IC socket, which is attached to the barometer modu...
-- the voltage converter IC is mounted on to the pitch co...
-- Wire each connector.
-- Mounted Side 1~
&ref(CIMG8723.JPG,,25%);~
?- Mounted Side 2~
&ref(CIMG8724.JPG,,25%);~
-- The Barometer module is mounted~
&ref(CIMG8725.JPG,,25%);~
- To test the operation~
This is a shell script for testing its operation. This sh...
&ref(scp1000_test.sh);~
---
** Sample #2 (Thermometer sensor) [#hb74b6d6]
>
A thermometer sensor and an AD converter are used for thi...
- Schematic~
&ref(bc10-002-0006.pdf);~
The schematic is only available. Since any boards are not...
- Description~
The thermometer sensor is an analog output type sensor, w...
It outputs 10.0mV per 1 degree Celsius, and it can measu...
Since the expansion board connectors of bc10 do not have ...
digital values via an analog-digital converter. Both ther...
2.7~5.5V, and bc10 provide power to the sensor and conver...
of bc10 requires at level of 1.8V, so it cannot connect d...
To connect these devices, the signal is needed to transfe...
This IC is not surface mount type, and a pitch converter ...
~
As long as keeping pairs A1~A8 with B1~B8, a pair can be ...
and 3.3V is always on B-side. bc10 and the analog-digital...
4 lines of SPI (CLK, MISI, MISO, and CS) are occupied.~
~
On the sample, the empty pins are remain open. There are ...
in far more stable condition, pull-up resistors can be ap...
|Product Name|Quantity|Specs|Memo|h
|bc10 expansion board|1|||
|Thermometer Sensor|2|MCP9700-E/TO|http://akizukidenshi.c...
|analog-digital converter |1|MCP3204|http://akizukidenshi...
|IC Socket DIP-14|1|14 Pin|http://akizukidenshi.com/catal...
|Pin Header 2x40|1||This can be divided into 2x5. http:/...
|Voltage converter IC|1|TXB0108|http://focus.tij.co.jp/jp...
|Pitch converter board|1||http://www.sunhayato.co.jp/prod...
|Ceramic capaciters|5|0.1uF||
-- One package of the thermometers contain 8 thermometer ...
in the expansion board, two thermometer sensors are used....
(As using 1 thermometer, four (4) 0.1μF-ceramic cap...
-- In this sample, both ceramic disk type and surface-mou...
-- The pin-headers are divided into 2 sets of 2x5 size.~
-- The data sheet of analog-digital converter is availabl...
This site is highly recommended for a reference.~
~
- Instructions~
Please read through whole section carefully before start ...
-- Each part is placed where is should be, and examine th...
-- The IC socket for the analog-digital converter and cer...
-- The thermometer sensors are put into the place.
-- Wire placed parts. The wires, which are going to attac...
wires are connected to the IC socket. Reminder that the v...
and keep enough room for mounting the voltage converter I...
-- Mount the voltage converter IC on the pitch converter...
Pin Headers, which are on the expansion board.~
-- All connectors are wired.~
-- Mounted Side 1~
&ref(CIMG8745.JPG,,25%);~
-- Mounted Side 2~
&ref(CIMG8746.JPG,,25%);~
* History of Revision [#df60e7f1]
>
- 2010/10/28 This article is initially uploaded.
- 2010/11/29 The samples are added.
Page: