Hardware/gumstix
[
Front page
] [
New
|
List of pages
|
Search
|
Recent changes
]
Start:
[[Hardware]]
* What is gumstix? [#yf9b01ab]
>
Gumstix is a gum stick sized board computer (computer-on-...
There are different series of gumstix computer-on-modules...
equipped with PXA270 (Marvell), and Overo series comes wi...
basix, and PXA255 is installed. For the newest informatio...
the homepage of [[Gumstix, Inc:http://www.gumstix.com/]].
* gumstix verdex pro [#dede92a5]
>
This section introduces the verdex pro, which is used as ...
(two set of gumstix verdex pro are in the picture).~
~
&ref(DSCF2071.JPG);~
~
gumstix verdex pro has PXA270 (Marvell) and runs embedded...
** Specifications [#dd569b83]
>
The table below shows the specifications of each model of...
| |verdex pro XL6P |verdex pro XM4-BT |verdex p...
|CPU |PXA270 600MHz |PXA270 400MHz |PXA270 4...
|RAM |128MB |64MB |64MB ...
|Flash |32MB |16MB |16MB ...
|Bluetooth|CENTER:- |CENTER:○ |CEN...
|microSD |CENTER:○ |CENTER:○ ...
Specifications of all models of verdex pro
- Expansion Boards
-- 60pin (HIROSE) ~
&ref(hirose60.JPG,,30%);
--- JTAB
--- LCD Interface (Up to 18bit, SVGA capable)
--- 3 x RS232C compatible (TTL level) ports
--- USB 2.0 OTG (Up to 12Mbps)
--- AC97
--- SPI, I2C and so on
-- 80pin (HIROSE)~
&ref(hirose80.JPG,,30%);
--- Camera Interface: Quick Capture Interface
--- CompactFlash
--- CPU local bus
-- 24 pin FPC ribbon cable
--- USB 2.0 OTG (Max 12Mbps)
--- SPI, I2C and so on
-- Power Supply: 3.6~5.0V
- Size: 80 x 20 x 5.3 mm
** How to create OpenEmbedded build system for gumstix [#...
>
This section explains how to create a build environment f...
OpenEmbedded is a software framework to create Linux dist...
the source of the building environment to creating the cr...
gumstix, please visit [[the company's developer site:http...
*** Host environment [#x9826671]
>
The direction shown in this section is strictly for Ubunt...
same version of gcc, which is included 8.04. The differen...
written here. If use the newer version of Ubuntu, please ...
>
For Ubuntu 9.04
- [[Build Environment on Ubuntu 9.04:http://www.gumstix.n...
***Create a build environment for gumstix [#r1eea81f]
>
The build environment for gumstix is based upon OpenEnbed...
from [[bitbake:http://wiki.openembedded.net/index.php/Bit...
the OpenEmbedded build system for gumstix. Hereafter the...
recommend to read the documentations in Setup and Program...
-[[gumstix developer site - Getting started:http://www.gu...
-[[gumstix developer site - Setting up a build environmen...
-[[gumstix developer site - Replacing the file system ima...
*** Checkout Source [#q8bdded5]
>
To create a new directly, check out the source code to th...
$ mkdir ~/gumstix
$ cd ~/gumstix
$ svn co https://gumstix.svn.sourceforge.net/svnroot/gum...
*** Set up the environmental variable [#la206536]
>
Set up the environment variable permanently.
$ cat gumstix-oe/extras/profile >> ~/.bashrc
Configure the environment variable temporarily,
$ . ~/gumstix/gumstix-oe/extras/profile
or there is another way to temporary set up the environme...
$ source ~/gumstix/gumstix-oe/extras/profile
***Set up a cache for downloaded source code [#a35bab94]
>
gumstix OE download source code in the middle of build pr...
a directly for saving source code. First, to manage the c...
For this example, the name of the group is '''oe'''.
$ sudo groupadd oe
$ sudo usermod -a -G oe {your_username}
Next, create a new directory for the cache of source code...
$ sudo mkdir /usr/share/sources
$ sudo chgrp oe /usr/share/sources
$ sudo chmod 0775 /usr/share/sources
$ sudo chmod ug+s /usr/share/sources
**Build [#kdae44f3]
>
To buyild a basic file image, execute the command shown b...
$ bitbake gumstix-basic-image
At the initial build, it downloads all source code, bui...
'''kernel image''' file, which can be installed in FlashR...
$ ls -1 ~/gumstix/gumstix-oe/tmp/deploy/glibc/images/gum...
Angstrom-gumstix-basic-image-glibc-ipk-2007.9-test-20090...
gumstix-basic-image-gumstix-custom-verdex.jffs2
modules-2.6.21-r1-gumstix-custom-verdex.tgz
uImage-2.6.21-r1-gumstix-custom-verdex.bin
Cross Toolchain for ARM is built and placed as described ...
$ ls ~/gumstix/gumstix-oe/tmp/cross/bin/
arm-angstrom-linux-gnueabi-addr2line
arm-angstrom-linux-gnueabi-ar
arm-angstrom-linux-gnueabi-as
arm-angstrom-linux-gnueabi-c++
arm-angstrom-linux-gnueabi-c++filt
arm-angstrom-linux-gnueabi-cpp
arm-angstrom-linux-gnueabi-depmod-2.6
arm-angstrom-linux-gnueabi-g++
arm-angstrom-linux-gnueabi-gcc
arm-angstrom-linux-gnueabi-gcc-4.1.2
arm-angstrom-linux-gnueabi-gccbug
arm-angstrom-linux-gnueabi-gcov
arm-angstrom-linux-gnueabi-generate-modprobe.conf
arm-angstrom-linux-gnueabi-gprof
arm-angstrom-linux-gnueabi-insmod
arm-angstrom-linux-gnueabi-insmod.static
arm-angstrom-linux-gnueabi-ld
arm-angstrom-linux-gnueabi-lsmod
arm-angstrom-linux-gnueabi-modinfo
arm-angstrom-linux-gnueabi-modprobe
arm-angstrom-linux-gnueabi-nm
arm-angstrom-linux-gnueabi-objcopy
arm-angstrom-linux-gnueabi-objdump
arm-angstrom-linux-gnueabi-ranlib
arm-angstrom-linux-gnueabi-readelf
arm-angstrom-linux-gnueabi-rmmod
arm-angstrom-linux-gnueabi-size
arm-angstrom-linux-gnueabi-strings
arm-angstrom-linux-gnueabi-strip
** Software [#k1bcdbf0]
>
&color(red){Caution:This software is not for Android, but...
-[[ffmpeg>Software/tips/ffmpeg#r1ee3a31]]
End:
[[Hardware]]
* What is gumstix? [#yf9b01ab]
>
Gumstix is a gum stick sized board computer (computer-on-...
There are different series of gumstix computer-on-modules...
equipped with PXA270 (Marvell), and Overo series comes wi...
basix, and PXA255 is installed. For the newest informatio...
the homepage of [[Gumstix, Inc:http://www.gumstix.com/]].
* gumstix verdex pro [#dede92a5]
>
This section introduces the verdex pro, which is used as ...
(two set of gumstix verdex pro are in the picture).~
~
&ref(DSCF2071.JPG);~
~
gumstix verdex pro has PXA270 (Marvell) and runs embedded...
** Specifications [#dd569b83]
>
The table below shows the specifications of each model of...
| |verdex pro XL6P |verdex pro XM4-BT |verdex p...
|CPU |PXA270 600MHz |PXA270 400MHz |PXA270 4...
|RAM |128MB |64MB |64MB ...
|Flash |32MB |16MB |16MB ...
|Bluetooth|CENTER:- |CENTER:○ |CEN...
|microSD |CENTER:○ |CENTER:○ ...
Specifications of all models of verdex pro
- Expansion Boards
-- 60pin (HIROSE) ~
&ref(hirose60.JPG,,30%);
--- JTAB
--- LCD Interface (Up to 18bit, SVGA capable)
--- 3 x RS232C compatible (TTL level) ports
--- USB 2.0 OTG (Up to 12Mbps)
--- AC97
--- SPI, I2C and so on
-- 80pin (HIROSE)~
&ref(hirose80.JPG,,30%);
--- Camera Interface: Quick Capture Interface
--- CompactFlash
--- CPU local bus
-- 24 pin FPC ribbon cable
--- USB 2.0 OTG (Max 12Mbps)
--- SPI, I2C and so on
-- Power Supply: 3.6~5.0V
- Size: 80 x 20 x 5.3 mm
** How to create OpenEmbedded build system for gumstix [#...
>
This section explains how to create a build environment f...
OpenEmbedded is a software framework to create Linux dist...
the source of the building environment to creating the cr...
gumstix, please visit [[the company's developer site:http...
*** Host environment [#x9826671]
>
The direction shown in this section is strictly for Ubunt...
same version of gcc, which is included 8.04. The differen...
written here. If use the newer version of Ubuntu, please ...
>
For Ubuntu 9.04
- [[Build Environment on Ubuntu 9.04:http://www.gumstix.n...
***Create a build environment for gumstix [#r1eea81f]
>
The build environment for gumstix is based upon OpenEnbed...
from [[bitbake:http://wiki.openembedded.net/index.php/Bit...
the OpenEmbedded build system for gumstix. Hereafter the...
recommend to read the documentations in Setup and Program...
-[[gumstix developer site - Getting started:http://www.gu...
-[[gumstix developer site - Setting up a build environmen...
-[[gumstix developer site - Replacing the file system ima...
*** Checkout Source [#q8bdded5]
>
To create a new directly, check out the source code to th...
$ mkdir ~/gumstix
$ cd ~/gumstix
$ svn co https://gumstix.svn.sourceforge.net/svnroot/gum...
*** Set up the environmental variable [#la206536]
>
Set up the environment variable permanently.
$ cat gumstix-oe/extras/profile >> ~/.bashrc
Configure the environment variable temporarily,
$ . ~/gumstix/gumstix-oe/extras/profile
or there is another way to temporary set up the environme...
$ source ~/gumstix/gumstix-oe/extras/profile
***Set up a cache for downloaded source code [#a35bab94]
>
gumstix OE download source code in the middle of build pr...
a directly for saving source code. First, to manage the c...
For this example, the name of the group is '''oe'''.
$ sudo groupadd oe
$ sudo usermod -a -G oe {your_username}
Next, create a new directory for the cache of source code...
$ sudo mkdir /usr/share/sources
$ sudo chgrp oe /usr/share/sources
$ sudo chmod 0775 /usr/share/sources
$ sudo chmod ug+s /usr/share/sources
**Build [#kdae44f3]
>
To buyild a basic file image, execute the command shown b...
$ bitbake gumstix-basic-image
At the initial build, it downloads all source code, bui...
'''kernel image''' file, which can be installed in FlashR...
$ ls -1 ~/gumstix/gumstix-oe/tmp/deploy/glibc/images/gum...
Angstrom-gumstix-basic-image-glibc-ipk-2007.9-test-20090...
gumstix-basic-image-gumstix-custom-verdex.jffs2
modules-2.6.21-r1-gumstix-custom-verdex.tgz
uImage-2.6.21-r1-gumstix-custom-verdex.bin
Cross Toolchain for ARM is built and placed as described ...
$ ls ~/gumstix/gumstix-oe/tmp/cross/bin/
arm-angstrom-linux-gnueabi-addr2line
arm-angstrom-linux-gnueabi-ar
arm-angstrom-linux-gnueabi-as
arm-angstrom-linux-gnueabi-c++
arm-angstrom-linux-gnueabi-c++filt
arm-angstrom-linux-gnueabi-cpp
arm-angstrom-linux-gnueabi-depmod-2.6
arm-angstrom-linux-gnueabi-g++
arm-angstrom-linux-gnueabi-gcc
arm-angstrom-linux-gnueabi-gcc-4.1.2
arm-angstrom-linux-gnueabi-gccbug
arm-angstrom-linux-gnueabi-gcov
arm-angstrom-linux-gnueabi-generate-modprobe.conf
arm-angstrom-linux-gnueabi-gprof
arm-angstrom-linux-gnueabi-insmod
arm-angstrom-linux-gnueabi-insmod.static
arm-angstrom-linux-gnueabi-ld
arm-angstrom-linux-gnueabi-lsmod
arm-angstrom-linux-gnueabi-modinfo
arm-angstrom-linux-gnueabi-modprobe
arm-angstrom-linux-gnueabi-nm
arm-angstrom-linux-gnueabi-objcopy
arm-angstrom-linux-gnueabi-objdump
arm-angstrom-linux-gnueabi-ranlib
arm-angstrom-linux-gnueabi-readelf
arm-angstrom-linux-gnueabi-rmmod
arm-angstrom-linux-gnueabi-size
arm-angstrom-linux-gnueabi-strings
arm-angstrom-linux-gnueabi-strip
** Software [#k1bcdbf0]
>
&color(red){Caution:This software is not for Android, but...
-[[ffmpeg>Software/tips/ffmpeg#r1ee3a31]]
Page: