DIY Electronics/USB
[
Front page
] [
New
|
List of pages
|
Search
|
Recent changes
]
Start:
[[DIY Electronics]]
* USB [#ke250d1e]
** Objective [#vd6f9ff5]
>
This section explains how to create an USB Breakout, whi...
type of USB is cable required for examining each signal o...
** Configuration of USB terminal [#fc87e3cf]
>
The table below shows the configuration of USB 2.0. The c...
its specification.~
|Number|Signal|Color|MEmo|
|1 |Vcc |Red|+5V|
|2 |-D |White| |
|3 |+D |Green| |
|4 |GND |Black| |
** How to make USB Type A (male)-Type A (female) cable [#...
>
- Requirements
-- A cable, which is met with USB 2.0 standard
-- [[CK-19>http://www.sunhayato.co.jp/products/details.ph...
- Instructions
-- Cut the USB 2.0 cable at the appropriate length. It wi...
-- Assemble CK-19, place each wire of the cable at select...
- Completion~
&ref(DSCF5258.JPG,,25%);
&ref(DSCF5259.JPG,,25%);~
* Revision History [#qe3b378a]
- 2011/2/24 This article is initially uploaded.
End:
[[DIY Electronics]]
* USB [#ke250d1e]
** Objective [#vd6f9ff5]
>
This section explains how to create an USB Breakout, whi...
type of USB is cable required for examining each signal o...
** Configuration of USB terminal [#fc87e3cf]
>
The table below shows the configuration of USB 2.0. The c...
its specification.~
|Number|Signal|Color|MEmo|
|1 |Vcc |Red|+5V|
|2 |-D |White| |
|3 |+D |Green| |
|4 |GND |Black| |
** How to make USB Type A (male)-Type A (female) cable [#...
>
- Requirements
-- A cable, which is met with USB 2.0 standard
-- [[CK-19>http://www.sunhayato.co.jp/products/details.ph...
- Instructions
-- Cut the USB 2.0 cable at the appropriate length. It wi...
-- Assemble CK-19, place each wire of the cable at select...
- Completion~
&ref(DSCF5258.JPG,,25%);
&ref(DSCF5259.JPG,,25%);~
* Revision History [#qe3b378a]
- 2011/2/24 This article is initially uploaded.
Page:
![[PukiWiki]](image/bc_logo.png "[PukiWiki]"){kind=logo}
