[[bc10]] COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. } -Contents #Contents * Summary [#pb51baa7]] [#e5d0a4d4] COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. } > This section shows how to replace a plug of an AC adapter. bc10 requires the EIAJ standard type-1 DC plug (center plus)~ for its AC adapter. If the plug of an AC adapter does not come with this type, its plug is needed to be changed. This~ explains how to replace the plug. * AC Adapter [#od013a9b] ** Specifications [#tfb9cbb7] COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. } > -The specifications of the AC adapter for bc10 are: -- Plug: EIAJ Type-1 (EIAJ-1) center plus -- Rated Voltage: DC 5V -- Rated Current: more than 2A -The specifications of the EIAJ standard type-1 DC plug -- Outer Diameter 2.35 mm -- Inner Diameter 0.7 mm -- Shaft Length 9.2 mm > The specifications of the AC adapter are described above. If an existing AC adapter does not have EIAJ-1 center plus, its~ plug is easily replaced. The next section shows how to alter the plug. ** How to replace AC Adapter [#x75b2aad] *** List of Parts [#pc72a56a] COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. } > |Name |Quantity|Specs |URL|Others| |AC Adapter|CENTER: 1| Switching AC to DC power supply |http://akizukidenshi.com/catalog/g/gM-01801/|| |EIAJ1 Plug|CENTER: 1|EIAJ DC plug Type 1 (Straight)||| |Heat shrinking tube|CENTER: 1|3mm diameter ||Cut it for adequate length| *** Instructions [#fdcc1709] COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. } > -AC Adapter --&ref(DSCF3214.JPG,,25%); -AC Adapter and EIAJ1 Plug --&ref(DSCF3215.JPG,,25%);~ Remove the original plug from the AC adapter, and replace it with EIAJ1 type, which is adequate for the DC input jack of~ bc10. Twist the strands at the edges of AC adapter's cables, and put the wire through the heat shrinking tube before the~ EIAJ1 plug solders the adapter. To use multimeter, identify the plus side and the minus side, and distinguish one from the~ other. Then, the EIAJ1 plug is solders the cables of the AC adapter. -After solder the EIAJ1 plug to the adapter --&ref(DSCF3217.JPG,,25%);~ To prevent short circuit, put heat shrinking tube over the lower wire's soldered area. This picture is taken before heat~ shrinking tube is put on. The heat shrinking tube covers completely over the soldered area.Then, shrink the tube. -Put on the cup --&ref(DSCF3218.JPG,,25%);~ Put on the cup, and this is the finished product. The assembly process is completed.~ COLOR(red){This AC adapter does not work with bc10 MP1. This article is solely for bc10ES1 and ES2. }