Backup diff of DIY Electronics/USB(No. 1)

List of Backups
View the diff current.
View the source.
View the backup.
Go to DIY Electronics/USB.
- 1 (2011-02-24 (Thu) 07:45:20)

The added line is THIS COLOR.
The deleted line is THIS COLOR.

[[ DIY Electronics]]

* USB [#ke250d1e]
** Objective [#vd6f9ff5]
>
This section explains how to create an USB Breakout,  which is actually an USB Type A (male)-Type A (female) cable. This~
type of USB is cable required for examining each signal of USB cable by a logic analyzer or an oscilloscope.~

** Configuration of USB terminal [#fc87e3cf]
>
The table below shows the configuration of USB 2.0. The color of each internal wears is predetermined according to~
its specification.~

** How to make USB Type A (male)-Type A (female) cable [#u8c3abe2]
>
- Requirements
-- A cable, which is met with USB 2.0 standard
-- [[CK-19>http://www.sunhayato.co.jp/products/details.php?id=07013&u=229]]
- Instructions
-- Cut the USB 2.0 cable at the appropriate length. It will be cut shorter than expected. (It tends to be longer than really needed.) 
-- Assemble CK-19, place each wire of the cable at selected terminal of USB 2.0, and solder each pin and wire.
- Completion

* Revision History [#qe3b378a]
- 2011/2/24 This article is initially uploaded.

Backup diff of DIY Electronics/USB (No. 1)