Backup diff of BC-USB-Kit/Pin Header Information vs current(No. 1)

List of Backups
View the diff.
View the source.
View the backup.
Go to BC-USB-Kit/Pin Header Information.
- 1 (2015-04-01 (Wed) 04:06:38)

The added line is THIS COLOR.
The deleted line is THIS COLOR.

[[labs.beatcraft.com]]~
[[BC-USB-Kit]]~
#contents

*BC-USB-Kit Pin Header Information [#ddaf136b]
>
To use BC-USB-Kit, you need to solder pin headers at the through-holes of BC-USB-Kit.~
BC-USB-Kit two types of pins: a DIP 28p pin header and an L-shaped 6-pin pin header.~
The pitch of these pins is 100mil. You may apply to any other pins if their pitch is 100mil.~
~
** DIP 28P pin header [#c04d6312]
>
To use BC-USB-Kit with an IC socket, bread board, and so on, a DIP 28p pin header is soldered to J1 expansion and ICSP connection terminals.~

** L-shaped 6-pin pinheder [#ub612ace]
~
&ref(28pin1.jpg,,50%); &ref(28pin2.jpg,,50%);~
~
** L-shaped 6-pin pin header [#ub612ace]
>
To connect BC-USB-Kit with an In-Circuit Debugger, an L-shaped 6-pin pin header is soldered to J2 ICSP connection terminals.~

~
&ref(6pin.jpg,,50%);~
~
You can cut a longer version of L-shaped pin header for this use.

* Revision History [#xa426d04]
>
-2015-04-01 This article is initially published.